Acrylic Letters and Numbers for Signs

Americana Bold – Acrylic Letters

Sizes Available


SKU: N/A Category:

What Are Acrylic Letters

This lettering type is lightweight and durable for outside use. It’s a great inexpensive way to get the exact look you want. It’s also extremely flexible to fit near any design. Again, stud mounting is what you’ll find to be the most common way of installing this lettering. These beautiful letters have sharp, crisp edges and come in over 100 styles. Acrylic lettering comes in sizes from 2″ to over 6’! Stud mounting is an easy, secure mounting method as long as you follow the instructions closely. We recommend adding an installation pattern which is available on the cart page. When you receive your pattern, it will show you exactly where to drill to make your sign perfectly level. Of course, a perfect presentation is everything with any numbers or letters you choose. These letters make amazing acrylic signs.

Acrylic letters is just like our others in that we have a lifetime warranty against fading, chipping and cracking. These letters are built to last against all types of weather. With the letters being water jet cut you get nice sharp clean lines. When you place your order expect them to ship out in 4 business days after your proof is approved. With free ground shipping it should take between 3-5 business days to receive. For the cost these letters really have an incredible value and will show off the colors you choose. You can always get in touch with us for more information and we’ll give you a complete run down on how our acrylic is processed and molded into the perfect shaped letter.

More About Acrylic Sign Lettering

If you don’t see a font or color that you would like we can also do a custom acrylic sign if you’re interested, just give us a call and we’ll get you taken care of. This letter type can be used on a variety of surfaces that makes it quite versatile. Your letters and numbers are laser cut to and can be as large as you’d like. If you were looking for a complete sign rather than just the letters please go to our acrylic signs section.

Installing Acrylic Lettering and Numbers

There are many different ways to install these numbers and letters depending on the surface you have and size. For example, if you have letters under 6” you can get away with double sided tape for indoor installation. Anytime you are outside we suggest you use any form of stud mounting to really anchor into the wall. This is a must for large letters that are heavier, for safety reasons you want to make sure they do not fall. When attaching to any wall, board or other flat surface you can use standoff spacers to give the sign a little depth especially if you are using thinner acrylic. The spacers come from ¼-1” and can look really great. With the standoff you have the option to put led lighting behind the letter to get that glow look at night if your sign is outdoors. When using stud mounting to install please use 100% pure silicone in the hole to hold everything in place. If you need more instruction or have questions a specialist is always around to help you with your acrylic sign letters. Please call us or email.

Ready To Buy Acrylic Letters

Ok since you are ready to buy let me walk you through the process. First dropdown is your font. Each font choice is written in its font to give you an idea on how it will look. Next dropdown in the size, be sure to measure you are first to make sure you order the correct size. Nothing worse than buying and it’s too small or large. Next choose the way you will be installing. I spoke about this before if you still have questions about an uneven surface or something else please call us. Now you need to choose the thickness of the letter. They range from ¼ inch to 1 inch thick. The smaller thickness is pigmented while the larger is painted. That brings us to the last dropdown which is color. Click on the right where we have color charts. This will make the image bigger when you can get a good look at each. If you want a color that is not there please contact us for custom colors. Now in the box put all text you want either numbers or letters. We provide an estimate on width but if its going to be a tight fit give us a call for an exact. Then hit add to cart. Once on the cart page you will have the ability to add an installation pattern, if you have never installed letters before I highly suggest you get this. If you are hiring a professional I would check with them if you should get this. This pattern helps make the sign straight and shows where all the studs will be. Well you should be set now and if you wanted wholesale a acrylic letter deal then just contact us

Acrylic FAQ:

Acrylic vs Plastic

What is the difference between Acrylic and Plastic?

Answer:        Acrylic is solid Acrylic that is laser cut. You can purchase the acrylic in different thicknesses (1/4”, 3/8”, 1/2″, 3/4″, 1” and 1-1/2” thicknesses) There is greater flexibility with sizes (half sizes). Plastic letters are a Formed Plastic, molded letter, hollow in the back and a usually deeper to start. The depth of Plastic Letters depends on the font and the height of the letter.

Acrylic Mounting:

What is Plain Mount

Answer:       Plain Mount is no mounting or hardware.  You would use an epoxy to the back of the letters to adhere the letters to your surface.

What is Pad Mount

Answer:       Pad Mount is where we glue pads on back of the letters.  You would use epoxy to the pads to adhere them to your surface.

What is Stud Mount?

Answer:       Stud mount is where we drill holes in the back of the acrylic letters and provide you with the stud (screw). We do a blind stud mount, where you will not see any screws or holes on the face of the letters. To install, drill your holes in your surface, put epoxy in the holes and slide the letters into the holes. We do recommend the Install Pattern, which will help install the letters straight and evenly spaced. The pattern will show you exactly where to drill the holes.

What is Stud Mount with Pads?

Answer:       The pads on the studs will create an adjustable standoff. You would screw the pads up or down the studs to create the standoff you need.

Is Double Sided Tape ok for outdoor use?

Answer:       Our double sided tape is only good for Indoor Use.

Font:

I have a custom font, can you use my font or a font that is not on your website?

Answer:       Yes, In Acrylic we can cut any font, all we need is either the font file or vector art (ai or eps file). There is no extra charge to cut your own font or a custom font.

Colors:

Can you paint my custom colors?

Answer:       Yes, we can paint custom colors, just send us the PMS or Pantone color code. There is a $20 color match charge for each custom color.

Logos:

Do you cut logos?

Answer:       Yes, we can cut logos.  Just let us know the size of the logo and send us vector art (ai or eps file) and we can work up a quote for you.

Installation Patterns:

Do you offer an Installation Pattern?

Answer:       Yes, when you click the CHECKOUT button, you will see a drop down menu asking if you want the Installation Pattern. The price of the pattern is determined by the number of characters in your order.

lifetime-warranty-symbol

  • Lifetime Guarantee
  • Ships in 4 Business Days
    after proof is approved
  • 100+ Standard Styles
  • 32 Standard Colors
  • Limitless customization
  • Laser Cut
  • Polished Edges
  • Thicknesses from 1/4” to 1”

Questions? Call us!
1-877-704-5170

Color Options

Thickacryliccolors900

Acrylic Mounting

acrylicmounting